The TI DLP470NE digital micromirror device (DMD) is a digitally controlledmicro-electromechanical system (MEMS) spatial light modulator (SLM) that enables bright full HD display systems. DLP470NE DMD is only 0.47-inches in size, yet delivers bright images and video up to 4000 lumens. The DLP470NE DMD, together with the DLPC4422 display controller a..

The TI DLP470TE digital micromirror device (DMD) is a digitally controlledmicro-electromechanical system (MEMs) spatial light modulator (SLM) that enables bright, full 4KUHD display solutions. When coupled with the appropriate optical system, the DLP470TE DMD displaystrue 4K UHD resolution (over 8 million pixels on screen) and is capable of deliver..

The TI DLP660TE digital micromirror device (DMD) is a digitally controlledmicro-opto-electromechanical system (MOEMS) spatial light modulator (SLM) that enables bright, affordable full 4K UHD display solutions. When coupled to an appropriate optical system, DLP660TEDMD displays true 4K UHD resolution (8.3M pixels on screen) and is capable of delive..

This is the FadeCandy from Adafruit, a USB controlled LED driver with on-board dithering to help illuminate your NeoPixel project. Even though the FadeCandy was designed to be used alongside of the NeoPixel Line the driver also works with most WS2811/12 LEDs. This little board has been designed to help both beginners and the advanced LED techie! E..

This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V. This board is based off of the PicoBuck LED Driver, developed in collaboration wi..

The Mi-Light RGBW LED Controller Box is a 2.4GHz RF controllable LED accessory that enables your non-addressable LED strips to change color, dim, and select pre-loaded modes via the Mi-Light Remote Control (sold separately). Essentially, this little plastic box enables any non-WS2812 or APA102 ("NeoPixel" or "DotStar") LED strips to act as if they ..

OSRAM Opto Semiconductors KWxx OSLON® Black Flat S LEDs come with excellent brightness in combination with outstanding luminance. These high-power LEDs are very stable, durable, and can be used with standard SMT processes. The Flat S LEDs are designed with a new solder pad layout that allows for high reliability and superior thermal management. Th..

OSRAM Opto Semiconductors KWxx OSLON® Black Flat S LEDs come with excellent brightness in combination with outstanding luminance. These high-power LEDs are very stable, durable, and can be used with standard SMT processes. The Flat S LEDs are designed with a new solder pad layout that allows for high reliability and superior thermal management. Th..

The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels. By default, each channel is driven at 330mA; that current can be reduced by either presenting an analog voltage or a PWM signal to the board. Version 12 of the board adds a solderable jumper that..

The AS7221 Smart Lighting Integration Kit (SLIK) is a complete color tuning luminaire reference design solution, built around the ams AS7221 Network-Enabled Smart Lighting Manager. The AS7221 SLIK is built from three interconnected modules: an AS7221 module, a Bluetooth module and an LED module with two strings of white LEDs for tuning (warm and co..

The SmartLED Shield enables the Teensy 4 to drive high-quality graphics to HUB75 RGB LED panels, with 36-bit color and 240 Hz refresh rate across large panels (e.g. 128x64 pixels). A Teensy 4.0 or Teensy 4.1 with pins fits into the socket on the shield, and the shield can attach directly to the HUB75 panel or through a ribbon cable. The SmartMatrix..

LED matrices are getting more powerful with each passing year requiring you to need a more powerful board to control them. That's where this shield comes into play! The SmartLED Shield V4 is the next iteration of the SmartMatrix Shield and provides you with a bridge for your Teensy 3.1, 3.2, 3.5, or 3.6 to your large LED matrix. The shield makes it..

The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet, or outputting over the XLR-3 Jack/ArtNet, this shield has you covered! It's the perfect way to get started developing your own custom DMX fixtures, or even adding ArtNet capabilities to a curr..

The SparkFun Large Digit Driver is a chainable controller backpack that can be soldered directly to the back of our large 6.5" 7-segment displays. Large numerical displays are a great addition to any project where you want to be able to see information at a distance. Scorekeepers and lap timers would be a great application for large 7-segment LED d..

The SparkFun LP55231 LED Driver Breakout is a self-contained solution for developing and deploying the nine-channel I2C LED controller. Remarkably simple, the breakout is equipped primarily with just the LP55231 LED controller IC, plus three RGB LEDs. It also features pads and jumpers for replacing the onboard LEDs with external ones, and configuri..